intel 8085 การใช้
- This was all done in Intel 8085 assembly.
- The extensions differ, however, from both the Intel 8085 and the Zilog Z80.
- The system is an adaptation of a similar system that was used in Sweden, which uses an Intel 8085 microprocessor.
- The serial data was connected to the Intel 8085's SID and SOD ( Serial In Data and Serial Out Data ) pins.
- Heath / Zenith then designed a dual Intel 8085 / 8088 based system dubbed the Z-100, in preassembled form, sold by ZDS ).
- This allowed the use of the Intel 8085's RIM and SIM instructions to read the level on the SID and set the level on SOD line.
- The included Instruction Set Reference Card uses entirely different mnemonics for the Intel 8085 CPU, as the product was a direct competitor to Intel's Multibus card offerings.
- And connecting a 6MHz oscillator to the 8085 is required for the 3MHz operation, because there's a built-in divider in the 8085 ( see our article on the Intel 8085 ).
- This was based on two Intel 8085 series microprocessors : one of which was given over to BOS . Unfortunately, the PCC-2000 was too expensive for the market and was never a great success.
- The Altair created a new industry of microcomputers and computer kits, with many others following, such as a wave of small business computers in the late 1970s based on the Intel 8080, Zilog Z80 and Intel 8085 microprocessor chips.
- The MITS Altair 8800 effectively created a new industry of microcomputers and computer kits, with many others following, such as a wave of small business computers in the late 1970s based on the Intel 8080, Zilog Z80 and Intel 8085 microprocessor chips.
- Just like the Intel 8085 and the Zilog Z80, the KR580VM1 needs only a single + 5V power supply instead of the three voltages required by the KR580VM80A . The maximum clock frequency was increased from 2MHz to 5MHz while the power consumption was reduced from 1.35W to 0.5W, compared to the KR580VM80A.